SPORTSWEAR & ACTIVEWEAR · CUT & SEW

Sportswear Manufacturer

Sublimated jerseys, training sets, compression layers and team kit — cut & sew to your artwork and your pattern.

Request a Quote See the Range

Full sublimationEdge-to-edge artwork
7–14 daysTypical sampling
Low MOQsFlexible for new brands

Hi-vis yellow and black long-sleeve cycling jersey with a full-length front zip, sublimated side artwork and contrast raglan sleeves

Chest branding

Close-up of the sublimated black graphic running across the lower body of the hi-vis yellow cycling jersey, continuing over the zip and side seam — Sublimated graphic

Team kitNumbers, names, sponsors

THE RANGE

What We Make for Sports Brands

Cycling, training, court and team — every piece cut to your spec.

Yellow and blue short-sleeve cycling jersey with a full front zip and a multi-colour sublimated lower body panel — **Cycling jerseys**Full-zip, sublimated, gripper hem

Black long-sleeve compression base layer with contrast overlock stitching along the raglan and side seams — **Compression layers**Four-way stretch, flatlock seams

Red basketball shorts with white side taping, a ribbed elasticated waistband and a drawcord — **Team shorts**Mesh knit, taped side panels

Navy and yellow sublimated team hoodie with an all-over faded print and applied club artwork across the chest — **Sublimated team wear**All-over print, no panel limits

Hi-vis yellow and black long-sleeve cycling jersey with contrast sleeves and a sublimated lower body graphic — **Long-sleeve jerseys**Thermal or lightweight knit

Hover any piece to magnify the stitching and fabric.

FABRIC & CONSTRUCTION

Built for Movement

Hover to magnify the knit, the print and the seam.

Close-up of matte navy technical performance polyester knit with a fine micro-mesh structure — **Performance knit**Moisture moving · four-way stretch

Extreme macro of a printed graphic edge showing the ink sitting on the fibres — **Sublimation**Dye enters the fibre · no hand feel

Extreme macro of a metal zipper closed on navy garment fabric with the teeth in focus — **Zips & trims**Full, half and quarter zip

Extreme macro of dense satin-stitch embroidery on navy fabric with individual threads visible — **Embroidery**Crests, sponsors, initials

Close-up of the raglan shoulder seam and bound neckline on a black compression top — **Raglan shoulder**Free movement, no seam on the cap

Close-up of white side taping running down the panel seam of red basketball shorts beside a ribbed waistband — **Taped side panels**Contrast tape in your colours

Close-up of a ribbed elasticated waistband with a flat woven drawcord threaded through the eyelets — **Waistbands**Rib, elastic, drawcord

Close-up of a multi-colour sublimated panel where the print runs edge to edge across the seam — **Print across seams**Artwork continues panel to panel

Chest marksPrint, embroidery or heat transfer

CUSTOMISATION

Your Kit, Your Way

Full sublimation

Artwork edge to edge, across seams, with no added weight or hand feel.

Names & numbers

Squad numbers, player names and sponsor blocks applied per piece.

Cut to your pattern

Athletic, regular or relaxed — graded to your size set.

Trims in your colours

Zips, drawcords, binding, elastic and reflective tape.

A wide-format heat press closing over a printed transfer sheet laid on cut grey jersey panels, with rolls of transfer paper behind

Printing, Stitching and Finishing

Sublimation, screen, DTG, DTF and embroidery all run in-house, so a colour change or a logo revision is a conversation, not a new supplier.

Low, flexible MOQs — we work with new brands and support sampling
Sampling in 7–14 days — typical first-sample turnaround
Made to your pattern — cut & sew, never rebranded blanks
Your brand only — labels, tags and packaging carry your name

See all manufacturing services

THE PROCESS

How Your Order Runs

Six stages. Nothing goes to bulk until you approve a physical sample.

A tech pack, fabric swatch cards and a colour reference laid out on a design table

01 — BRIEF

Tell us your idea

Send a tech pack, a sketch or a garment you want matched, with a rough quantity.

A roll of navy knit fabric being unrolled across a backlit inspection frame

02 — FABRIC

Fabric & development

Composition, GSM and construction confirmed, then the pattern is made and cut.

A printed tech pack with measurement tables beside a folded sample garment and tape measure

03 — SAMPLE

Sample & approval

A physical sample with your branding — typically 7–14 days. Bulk starts only once you approve it.

Navy jersey fabric guided under the presser foot of an industrial sewing machine

04 — PRODUCTION

Production

Cut and sewn against the approved sample. Timelines depend on quantity and specification.

A finished garment measured flat with a tape measure against a printed spec sheet

05 — QUALITY

Quality control

Measurements, seams, branding position and colour checked against your approved sample.

Finished garments folded and stacked at a finishing table beside clear polybags

06 — SHIPPING

Packing & shipping

Labelled, tagged, packed to your instructions and shipped worldwide with export documents.

Start Your Project

QUESTIONS

Sportswear Questions

What is your minimum order quantity?

Our MOQs are low and flexible rather than a single fixed number — they depend on the garment, the fabric and the decoration involved. Tell us what you want to make and roughly how many, and we will confirm the MOQ for that spec.

Do you work with new clothing brands?

Yes. A large part of what we do is first production runs for new labels, which is why we keep MOQs flexible and support sampling before bulk.

Do you provide samples before bulk production?

Always. A physical sample is made and sent for your approval, and bulk does not start until you approve it.

How long does sampling take?

Typically 7–14 days for a first sample, depending on the garment and whether fabric and trims need to be sourced in.

How long does bulk production take?

Bulk timelines depend on the quantity and the specification, so we confirm a schedule with you once the sample is approved rather than quoting a fixed number up front.

Can you manufacture from a tech pack?

Yes. A tech pack with measurements, fabric details and artwork is the fastest route to an accurate sample.

Can you manufacture from a physical sample?

Yes. Send a garment you want matched and we will pattern from it. A sketch with measurements also works if that is all you have.

Do you offer private-label manufacturing?

Yes. Neck labels, care labels, hang tags and packaging all carry your brand. Nothing that reaches your customer carries ours.

Can you source fabrics?

Yes. We source cotton, fleece, pique, twill, canvas and technical knits, and we can work to a composition and GSM you specify.

Do you ship internationally?

Yes, worldwide by courier — DHL, FedEx and UPS — with export documentation. We are an FBR-registered business, a Sialkot Chamber of Commerce & Industry member and TDAP registered.

What is sublimation printing and when should I use it?

Sublimation turns the dye into a gas that bonds inside polyester fibre, so the artwork has no weight and no hand feel and will not crack or peel. It suits all-over prints, gradients and artwork that must run across seams. It only works on polyester and on light base fabrics.

Can you add player names and squad numbers?

Yes. Names, numbers and sponsor blocks are applied per piece, so every garment in a team order can differ while the base kit stays identical.

Can you match our existing team colours?

Yes. Send a reference garment, a Pantone reference or artwork and we will match it on the sample for your approval before bulk.

Have a Kit to Make? Send the Artwork.

Send your artwork, a tech pack or a reference jersey with a rough quantity.

Request a Quote WhatsApp Us