HOODIES & SWEATSHIRTS · CUT & SEW

Hoodie Manufacturer

Heavyweight fleece, French terry and loopback — built to your weight, your fit and your branding.

Request a Quote See the Range

320–400 GSMMid to heavyweight
7–14 daysTypical sampling
Low MOQsFlexible for new brands

Contrast panel pullover hoodie in mid-weight fleece with a kangaroo pocket and ribbed cuffs and hem

Chest branding

Close-up of the lined hood of the blue and black hoodie showing the contrast inner lining, both drawcords and the raglan shoulder seam — Lined hood & drawcords

Heavyweight320–400 GSM fleece

THE RANGE

Hoodies & Sweatshirts

Pullover, zip-through, crewneck and oversized — cut to your block.

Charcoal acid-wash pullover hoodie with a raised embroidered chest monogram, kangaroo pocket and ribbed cuffs — **Washed & garment-dyed**Acid wash, pigment dye, over-dye

Olive green pullover hoodie with tonal script embroidery at the left chest, a kangaroo pocket and a lined hood — **Classic pullover**Loopback or brushed fleece

Dusty pink oversized crewneck sweatshirt with tonal raised embroidery at the centre chest and ribbed hem and cuffs — **Oversized crewneck**Drop shoulder, boxy body

Heavyweight hoodiesSleeve and back placements

Hover any piece to magnify the stitching and fabric.

FABRIC & CONSTRUCTION

Weight You Can Feel

Hover to magnify the loopback, the rib and the stitch.

Three folded pieces of fleece in charcoal, grey and navy laid side by side, each turned back to show the brushed inner face and its thickness — **Fleece weights**320–400 GSM · compare the pile

Close-up of knitted rib trim showing the raised vertical rib texture — **Knitted rib**Cuffs, hems, collars

Extreme macro of dense satin-stitch embroidery on navy fabric with individual threads visible — **Embroidery**Flat, 3D puff, chenille

Extreme macro of a screen-printed graphic edge on cotton jersey showing the ink sitting on the fibres — **Printing**Screen, DTG, DTF, puff

Close-up of a lined two-panel hood with drawcords and a woven neck label — **Hood & drawcord**Two or three panel, lined or self

Extreme close-up of a kangaroo pocket corner on washed charcoal fleece, showing the bar-tack, the topstitching and the ribbed hem below — **Kangaroo pocket**Bar-tacked at both openings

Extreme close-up of a fleece hem where the ribbed band meets the body, with the brushed loopback inner face visible at the fold — **Hem & loopback**Rib band, brushed inner face

Close-up of a ribbed knit cuff at the end of a fleece sleeve — **Rib cuffs**Matched or contrast rib

Close-up of the ribbed waist hem of an oversized crewneck sweatshirt — **Rib hem**Elasticated or plain

Chest brandingEmbroidery, print or applique

CUSTOMISATION

Your Hoodie, Your Spec

Weight & hand

320, 350, 400 GSM — brushed, loopback or French terry.

Fit & block

Regular, oversized or drop-shoulder, graded to your size set.

Branding

Embroidery, screen, puff, applique, woven labels and hem tabs.

Wash & dye

Garment dye, pigment, acid wash and enzyme finishes.

Fabric spreading and cutting tables with layered fabric and cut bundles stacked to one side

Cut & Sewn, Never Rebranded

Your hoodie is made from your pattern and your fabric choice — not a blank with a logo added afterwards.

Low, flexible MOQs — we work with new brands and support sampling
Sampling in 7–14 days — typical first-sample turnaround
Made to your pattern — cut & sew, never rebranded blanks
Your brand only — labels, tags and packaging carry your name

See all manufacturing services

THE PROCESS

How Your Order Runs

Six stages. Nothing goes to bulk until you approve a physical sample.

A tech pack, fabric swatch cards and a colour reference laid out on a design table

01 — BRIEF

Tell us your idea

Send a tech pack, a sketch or a garment you want matched, with a rough quantity.

A roll of navy knit fabric being unrolled across a backlit inspection frame

02 — FABRIC

Fabric & development

Composition, GSM and construction confirmed, then the pattern is made and cut.

A printed tech pack with measurement tables beside a folded sample garment and tape measure

03 — SAMPLE

Sample & approval

A physical sample with your branding — typically 7–14 days. Bulk starts only once you approve it.

Navy jersey fabric guided under the presser foot of an industrial sewing machine

04 — PRODUCTION

Production

Cut and sewn against the approved sample. Timelines depend on quantity and specification.

A finished garment measured flat with a tape measure against a printed spec sheet

05 — QUALITY

Quality control

Measurements, seams, branding position and colour checked against your approved sample.

Finished garments folded and stacked at a finishing table beside clear polybags

06 — SHIPPING

Packing & shipping

Labelled, tagged, packed to your instructions and shipped worldwide with export documents.

Start Your Project

QUESTIONS

Hoodie Questions

What is your minimum order quantity?

Our MOQs are low and flexible rather than a single fixed number — they depend on the garment, the fabric and the decoration involved. Tell us what you want to make and roughly how many, and we will confirm the MOQ for that spec.

Do you work with new clothing brands?

Yes. A large part of what we do is first production runs for new labels, which is why we keep MOQs flexible and support sampling before bulk.

Do you provide samples before bulk production?

Always. A physical sample is made and sent for your approval, and bulk does not start until you approve it.

How long does sampling take?

Typically 7–14 days for a first sample, depending on the garment and whether fabric and trims need to be sourced in.

How long does bulk production take?

Bulk timelines depend on the quantity and the specification, so we confirm a schedule with you once the sample is approved rather than quoting a fixed number up front.

Can you manufacture from a tech pack?

Yes. A tech pack with measurements, fabric details and artwork is the fastest route to an accurate sample.

Can you manufacture from a physical sample?

Yes. Send a garment you want matched and we will pattern from it. A sketch with measurements also works if that is all you have.

Do you offer private-label manufacturing?

Yes. Neck labels, care labels, hang tags and packaging all carry your brand. Nothing that reaches your customer carries ours.

Can you source fabrics?

Yes. We source cotton, fleece, pique, twill, canvas and technical knits, and we can work to a composition and GSM you specify.

Do you ship internationally?

Yes, worldwide by courier — DHL, FedEx and UPS — with export documentation. We are an FBR-registered business, a Sialkot Chamber of Commerce & Industry member and TDAP registered.

What fabric weights do you offer for hoodies?

Commonly 320–400 GSM in brushed fleece, loopback or French terry. We can work heavier or lighter if your spec calls for it — the weight is confirmed on the sample so you feel it before bulk.

What is the difference between loopback and brushed fleece?

Loopback leaves the inner loops intact, so it is more breathable and holds its structure. Brushed fleece has those loops brushed out into a soft pile, which feels warmer and heavier. Both are offered.

Can you do garment dyeing and washes?

Yes — garment dye, pigment dye, acid wash and enzyme finishes are all available. Because washes shift colour and shrinkage, these are always confirmed on a sample first.

Have a Hoodie to Make? Send the Spec.

Send a tech pack, a sketch or a hoodie you want matched, with a rough quantity.

Request a Quote WhatsApp Us